絞り込み
for industrial equipment
-
CO (4P) gland packing SCS14 models- On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
for agricultural
for industrial equipment
for the chemical industry
●Wetted parts are made of SCS14 and SUS316, so they have excellent corrosion resistance.
●Since it is a self-priming type, it can be drained and pumped with the first priming.
● Directly connected 4P motor for quiet operation and easy maintenance and inspection. -
COM (4P) mechanical seal SCS13 models
- On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
- for agricultural
- for industrial equipment
- for the chemical industry
●Wetted parts are made of SCS13 and SUS304 for excellent corrosion resistance.
●Since it is a self-priming type, it can be drained and pumped with the first priming.
● Directly connected 4P motor for quiet operation and easy maintenance and inspection. -
COM (4P) mechanical seal SCS14 models
- On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
- for agricultural
- for industrial equipment
- for the chemical industry
●Wetted parts are made of SCS14 and SUS316, so they have excellent corrosion resistance.
●Since it is a self-priming type, it can be drained and pumped with the first priming.
● Directly connected 4P motor for quiet operation and easy maintenance and inspection. -
COP (2P) mechanical seal models- On-land pumps (plastic)Direct-Coupled/Self-Priming Models
- for agricultural
for fishing- for industrial equipment
- for the chemical industry
●Wetted part uses resin and stainless steel, rust-resistant multi-type.
●By combining impellers and internal casings that have undergone waterway analysis, high performance is achieved.
● 2P motor direct connection, lightweight and compact space saving.
●Maintenance is easy with a mechanical seal on the shaft seal. -
CS models (non-automatic)- Submersible PumpsPlastic/stainless steel models
- for industrial equipment
- for the chemical industry
●Wetted parts made of stainless steel, suitable for a wide range of applications as a light corrosion-resistant pump.
● Compact and lightweight design for easy transportation.
●Semi-open impeller that does not easily clog with foreign matter.
●For the shaft seal, a mechanical seal containing lubricating oil is used to prevent water from entering the motor and has excellent durability.
●Equipped with an automatic burnout prevention device in the motor. -
CX models (non-automatic)/CXA models (automatic)- Submersible PumpsPlastic/stainless steel models
- for fishing
- for industrial equipment
for kitchen wastewater
for pit gray water
for septic tank- for the chemical industry
● Compact and lightweight type that is convenient to carry and install.
● All wetted parts are made of resin and stainless steel (SUS316), which greatly improves rust resistance and durability.
●Eliminates clogging with a uniquely developed vortex structure.
●Original development of high-efficiency, energy-saving impellers and electric motors.
●Equipped with an automatic burnout prevention device in the motor. -
CMP (2P) mechanical seal models- On-land pumps (plastic)Close-Coupled/Self-Priming Models
- Products for general households
- for agricultural
- for fishing
- for industrial equipment
- for the chemical industry
●Wetted parts are made of resin and stainless steel. Rust-resistant multi-type.
●By combining impellers and internal casings that have undergone waterway analysis, high performance is achieved.
●Integrated low-noise electric motor and pump for compact and quiet operation.
●Maintenance is easy with a mechanical seal on the shaft seal.
●The electric motor comes with a manual return type protector to prevent burnout. (0.45kW or less)
● Uses a fully enclosed fan-cooled outdoor motor. (Excluding 0.1kW) -
PX models (non-automatic)/PXA models (automatic)- Submersible PumpsPlastic/stainless steel models
- Products for general households
- for industrial equipment
- for kitchen wastewater
- for pit gray water
- for septic tank
●Lightweight, compact and hard to clog.
● All wetted parts are made of resin and stainless steel for excellent rust resistance and durability.
● New mechanism that can change the discharge direction either "vertically" or "horizontally". (excluding 1.5kW and 2.2kW)
● Back pull-out structure that allows inspection and cleaning while piping is connected.
●Equipped with an automatic burnout prevention device in the motor.
● Cooling and lubricity of the mechanical seal are improved by adopting LLT (Long Life Tech). (0.25kW to 0.75kW) -
PG models (non-automatic)/PGA models (automatic)- Submersible PumpsPlastic/stainless steel models
- Products for general households
- for industrial equipment
- for pit gray water
●Wide range of applications such as clean water, sewage, and waste water.
● All wetted parts are made of resin and stainless steel for excellent rust resistance and durability.
● New mechanism that can change the discharge direction either "vertically" or "horizontally". (excluding 1.5kW and 2.2kW)
● Back pull-out structure that allows inspection and cleaning while piping is connected.
●Equipped with an automatic burnout prevention device in the motor.
● Cooling and lubricity of the mechanical seal are improved by adopting LLT (Long Life Tech). (0.25kW to 0.75kW) -
MFS (4P) gland packing models- On-Land Pumps (Cast Iron)Direct-Coupled/Self-Priming Models
for cooling tower
for high pressure- for industrial equipment
●Excellent self-priming performance, no need for foot valve and easy pumping operation.
●By using ball bearings and gland packing for shaft sealing, maintenance is easy.
●The simple structure conforms to the self-priming theory and exhibits reliable self-priming performance, with low noise and low vibration.
FAQs
Provides help information on how to use each product and when you have problems.
