Product Search Results

絞り込み

fresh water

  • CO (4P) gland packing SCS14 models
    • On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
    • for agricultural
    • for industrial equipment
    • for the chemical industry

    ●Wetted parts are made of SCS14 and SUS316, so they have excellent corrosion resistance.
    ●Since it is a self-priming type, it can be drained and pumped with the first priming.
    ● Directly connected 4P motor for quiet operation and easy maintenance and inspection.

  • COM (4P) mechanical seal SCS13 models
    • On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
    • for agricultural
    • for industrial equipment
    • for the chemical industry

    ●Wetted parts are made of SCS13 and SUS304 for excellent corrosion resistance.
    ●Since it is a self-priming type, it can be drained and pumped with the first priming.
    ● Directly connected 4P motor for quiet operation and easy maintenance and inspection.

  • COM (4P) mechanical seal SCS14 models
    • On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
    • for agricultural
    • for industrial equipment
    • for the chemical industry

    ●Wetted parts are made of SCS14 and SUS316, so they have excellent corrosion resistance.
    ●Since it is a self-priming type, it can be drained and pumped with the first priming.
    ● Directly connected 4P motor for quiet operation and easy maintenance and inspection.

  • COP (2P) mechanical seal models
    • On-land pumps (plastic)Direct-Coupled/Self-Priming Models
    • for agricultural
    • for fishing
    • for industrial equipment
    • for the chemical industry

    ●Wetted part uses resin and stainless steel, rust-resistant multi-type.
    ●By combining impellers and internal casings that have undergone waterway analysis, high performance is achieved.
    ● 2P motor direct connection, lightweight and compact space saving.
    ●Maintenance is easy with a mechanical seal on the shaft seal.

  • CS models (non-automatic)
    • Submersible PumpsPlastic/stainless steel models
    • for industrial equipment
    • for the chemical industry

    ●Wetted parts made of stainless steel, suitable for a wide range of applications as a light corrosion-resistant pump.
    ● Compact and lightweight design for easy transportation.
    ●Semi-open impeller that does not easily clog with foreign matter.
    ●For the shaft seal, a mechanical seal containing lubricating oil is used to prevent water from entering the motor and has excellent durability.
    ●Equipped with an automatic burnout prevention device in the motor.

  • CS-L models (for bottom water)
    • Submersible PumpsPlastic/stainless steel models
    • for bottom water

    ● Drainage is possible up to a water level of 1 to 2 mm.
    ●Wetted parts made of stainless steel, suitable for a wide range of applications as a light corrosion-resistant pump.
    ● Compact and lightweight design for easy transportation.
    ●For the shaft seal, a mechanical seal containing lubricating oil is used to prevent water from entering the motor and has excellent durability.
    ●Equipped with an automatic burnout prevention device in the motor.

  • CX models (non-automatic)/CXA models (automatic)
    • Submersible PumpsPlastic/stainless steel models
    • for fishing
    • for industrial equipment
    • for kitchen wastewater
    • for pit gray water
    • for septic tank
    • for the chemical industry

    ● Compact and lightweight type that is convenient to carry and install.
    ● All wetted parts are made of resin and stainless steel (SUS316), which greatly improves rust resistance and durability.
    ●Eliminates clogging with a uniquely developed vortex structure.
    ●Original development of high-efficiency, energy-saving impellers and electric motors.
    ●Equipped with an automatic burnout prevention device in the motor.

  • CX-L models (for bottom water)
    • Submersible PumpsPlastic/stainless steel models
    • for bottom water

    ● Drainage is possible up to a water level of 5 to 6 mm.
    ● Compact and lightweight type that is convenient to carry and install.
    ● All wetted parts are made of resin and stainless steel (SUS316), which greatly improves rust resistance and durability.
    ●Original development of high-efficiency, energy-saving impellers and electric motors.
    ●Equipped with an automatic burnout prevention device in the motor.

  • SSX models (non-automatic)
    • Submersible PumpsCast Iron Models
    • for agricultural
    • for civil engineering

    ● The impeller uses a special synthetic rubber with improved wear resistance.
    ●The unique vortex generation mechanism guides solid matter by vortex flow and discharges it without clogging in the pump.
    ●The shaft seal is completely sealed by attaching a V-ring.
    ● Back pull-out structure for easy maintenance and inspection.
    ●Equipped with an automatic burnout prevention device in the motor.

  • CSA models (automatic)
    • Submersible PumpsCompact Models
    • household use

    ●Wetted parts are completely rust-proof.
    ●Greatly improved durability.
    ●Simple structure for easy maintenance and inspection.
    ● Compact and lightweight type that is easy to handle.
    ●Equipped with an automatic burnout prevention device in the motor.
    ● Plug with earth leakage breaker.

PAGE TOP