絞り込み
waste water without solids
-
COM (2P) mechanical seal SCS14 models- On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
for agricultural
for high pressure
for industrial equipment
for the chemical industry
●Wetted parts are made of SCS13 and SUS304 for excellent corrosion resistance.
●2P motor direct connection, lightweight and compact space-saving type
● Lineup of models for a wide range of applications for high lift. -
TFSD (2P) mechanical seal models- On-Land Pumps (Stainless Steel)Close-Coupled/Non-Self-Priming Models
- for industrial equipment
- for the chemical industry
● Excellent durability due to the adoption of stainless steel casting.
● A highly reliable mechanical seal (SiC) is used for the shaft seal.
●The impeller adopts a durable semi-open type, and can pass some solid objects.
●Simple and compact integrated motor shaft structure eliminates the need for centering.
●Because of the center top structure, the discharge direction can be changed freely regardless of the mounting direction.
● Quiet driving sound. -
CS-N models (non-automatic)- Submersible PumpsPlastic/stainless steel models
for fishing- for industrial equipment
- for the chemical industry
● High-grade stainless steel SUS316 and SCS14 are used for all wetted parts. Resistant to acids, alkalis and salts.
● A double mechanical seal with excellent corrosion resistance and durability is used for the shaft seal.
●Equipped with an automatic burnout prevention device in the motor. (7.5kW or less) -
TCVS models (non-automatic)- Submersible PumpsCast Iron Models
for civil engineering- for industrial equipment
for kitchen wastewater
for pit gray water
for septic tank
●The newly designed high-performance whirlpool impeller prevents clogging and winding even in sewage containing fibrous contaminants.
● Low-wear type that prevents foreign matter from directly passing through the impeller.
●Built-in automatic return type motor protection device (auto cut).
●The shaft seal uses a double mechanical seal and an oil seal. (1.5 kW or more when combined with an oil seal)
●SiC with excellent wear resistance is used for the sliding part of the mechanical seal. -
TCN models (non-automatic)- Submersible PumpsCast Iron Models
- for civil engineering
- for industrial equipment
- for pit gray water
●Built-in automatic return type motor protection device (auto cut).
●The shaft seal uses a double mechanical seal and an oil seal or seal ring (5.5 to 7.5kW only).
●SiC with excellent wear resistance is used for the sliding part of the mechanical seal.
● Built-in equalizer (pressure adjustment mechanism) in the oil chamber (2.2 to 7.5 kW only). -
SD models (non-automatic)- Submersible PumpsCast Iron Models
- for civil engineering
- for industrial equipment
- for pit gray water
● Easy to use and economical, reliable operation even under harsh conditions.
●Simple structure, small size and light weight, and excellent wear resistance.
● We have a wide range of models for general construction that can be used in a wide range of applications.
●Built-in electric motor protector. (11 kW or less) -
SXD models (non-automatic)- Submersible PumpsCast Iron Models
- for civil engineering
- for industrial equipment
- for pit gray water
● All models use aluminum alloy for the motor frame and upper casing.
●The direction of the discharge pipe can be changed so that the hose does not bend or bend unnecessarily.
●Employs a semi-internal motor frame cooling system that enables continuous operation even at low water levels.
●Vortex type impeller with long life and wear resistance.
●Large gap prevents blockage of wood chips and sand, eliminating troubles on site.
●Equipped with an automatic burnout prevention device in the motor. -
SDK models (non-automatic)- Submersible PumpsCast Iron Models
- for civil engineering
- for industrial equipment
●The main drainage channel is independent, and a very small amount of the drainage is divided to cool the peripheral wall of the motor room, making it compact.
●Strong structure, abrasion resistance, excellent durability.
●Equipped with an automatic burnout prevention device in the motor. (11 kW or less) -
S models (non-automatic; 1.5 to 5.5 kW)- Submersible PumpsSpecial Synthetic Rubber Models
- for civil engineering
- for industrial equipment
●By using lightweight materials, weight reduction is achieved.
●Vortex type impeller with long life and wear resistance makes it easy to pump water mixed with earth and sand.
● 4-end face SiC mechanical seals are used for shaft seals, and oil immersion method is adopted for outstanding durability.
● Uses a new type motor that keeps the temperature rise of the motor windings low.
●Equipped with an automatic burnout prevention device in the motor.
FAQs
Provides help information on how to use each product and when you have problems.
