絞り込み
fresh water
-
CMP (2P) mechanical seal models
- On-land pumps (plastic)Close-Coupled/Self-Priming Models
- Products for general households
- for agricultural
- for fishing
- for industrial equipment
- for the chemical industry
●Wetted parts are made of resin and stainless steel. Rust-resistant multi-type.
●By combining impellers and internal casings that have undergone waterway analysis, high performance is achieved.
●Integrated low-noise electric motor and pump for compact and quiet operation.
●Maintenance is easy with a mechanical seal on the shaft seal.
●The electric motor comes with a manual return type protector to prevent burnout. (0.45kW or less)
● Uses a fully enclosed fan-cooled outdoor motor. (Excluding 0.1kW) -
CMP-D (2P) mechanical seal models
- On-land pumps (plastic)Close-Coupled/Self-Priming Models
- Products for general households
- for fishing
●Wetted parts are made of resin and stainless steel. Rust-resistant multi-type.
●Maintenance is easy with a mechanical seal on the shaft seal.
●Power supply dedicated to DC 24V.
●Reverse prevention function: Reliable design that does not start the motor when wiring is reversed.
● High performance is achieved by combining a semi-open impeller and a casing that have undergone waterway analysis.
●Integrated low-noise electric motor and pump for compact and quiet operation. -
HP (2P) mechanical seal models
- On-land pumps (plastic)Close-Coupled/Self-Priming Models
- Products for general households
- household use
● Easy-to-use self-priming pump.
●Small size, light weight, high performance and low noise.
● Suitable for a wide range of applications, from home use to agriculture and fisheries.
●The electric motor comes with a manual return type protector to prevent burnout. -
PX models (non-automatic)/PXA models (automatic)
- Submersible PumpsPlastic/stainless steel models
- Products for general households
- for industrial equipment
- for kitchen wastewater
- for pit gray water
- for septic tank
●Lightweight, compact and hard to clog.
● All wetted parts are made of resin and stainless steel for excellent rust resistance and durability.
● New mechanism that can change the discharge direction either "vertically" or "horizontally". (excluding 1.5kW and 2.2kW)
● Back pull-out structure that allows inspection and cleaning while piping is connected.
●Equipped with an automatic burnout prevention device in the motor.
● Cooling and lubricity of the mechanical seal are improved by adopting LLT (Long Life Tech). (0.25kW to 0.75kW) -
PG models (non-automatic)/PGA models (automatic)
- Submersible PumpsPlastic/stainless steel models
- Products for general households
- for industrial equipment
- for pit gray water
●Wide range of applications such as clean water, sewage, and waste water.
● All wetted parts are made of resin and stainless steel for excellent rust resistance and durability.
● New mechanism that can change the discharge direction either "vertically" or "horizontally". (excluding 1.5kW and 2.2kW)
● Back pull-out structure that allows inspection and cleaning while piping is connected.
●Equipped with an automatic burnout prevention device in the motor.
● Cooling and lubricity of the mechanical seal are improved by adopting LLT (Long Life Tech). (0.25kW to 0.75kW) -
S models (non-automatic)
- Submersible PumpsSpecial Synthetic Rubber Models
- Products for general households
- for agricultural
- for civil engineering
- For flood and disaster countermeasures
●Excellent abrasion resistance in the 220W, 250W, and 500W classes.
●Uses special resin and synthetic rubber with improved wear resistance and durability, and a new type of shaft sealing system.
● Compact and lightweight type that is easy to handle.
●Equipped with an automatic burnout prevention device in the motor. -
S-500LN (for bottom water)
- Submersible PumpsSpecial Synthetic Rubber Models
- Products for general households
- for bottom water
●Drainage less than 1mm is realized. (with check valve)
●Outstanding abrasion resistance in the 500W class.
● Compact and lightweight type that is easy to handle.
●Equipped with an automatic burnout prevention device in the motor. -
SP-220 models (non-automatic)
- Submersible PumpsSpecial Synthetic Rubber Models
- Products for general households
- for agricultural
- for civil engineering
●Excellent abrasion resistance in the 220W class, ideal for liquids containing earth and sand.
●Uses special resin and synthetic rubber with improved wear resistance and durability, and a new type of shaft sealing system.
● Compact and lightweight type that is easy to handle.
●Equipped with an automatic burnout prevention device in the motor. -
SX models (non-automatic)/SXA models (automatic)
- Submersible PumpsCompact Models
- Products for general households
- for kitchen wastewater
- for septic tank
- household use
●The original vortex generation mechanism induces solid matter with a vortex and banishes clogging in the pump.
● Uses an oil bath type mechanical seal.
●Equipped with an automatic burnout prevention device in the motor. -
SG models (non-automatic)/SA models (automatic)
- Submersible PumpsCompact Models
- Products for general households
- household use
● Compact and lightweight design with simple structure and easy transportation.
●The semi-open impeller makes it easy to pump up sewage that passes through the strainer, allowing it to be used in a wide range of applications.
● Uses an oil bath type mechanical seal.
●Equipped with an automatic burnout prevention device in the motor.
FAQs
Provides help information on how to use each product and when you have problems.