Product Search Results

絞り込み

waste water without solids

  • CS models (non-automatic)
    • Submersible PumpsPlastic/stainless steel models
    • for industrial equipment
    • for the chemical industry

    ●Wetted parts made of stainless steel, suitable for a wide range of applications as a light corrosion-resistant pump.
    ● Compact and lightweight design for easy transportation.
    ●Semi-open impeller that does not easily clog with foreign matter.
    ●For the shaft seal, a mechanical seal containing lubricating oil is used to prevent water from entering the motor and has excellent durability.
    ●Equipped with an automatic burnout prevention device in the motor.

  • CS-L models (for bottom water)
    • Submersible PumpsPlastic/stainless steel models
    • for bottom water

    ● Drainage is possible up to a water level of 1 to 2 mm.
    ●Wetted parts made of stainless steel, suitable for a wide range of applications as a light corrosion-resistant pump.
    ● Compact and lightweight design for easy transportation.
    ●For the shaft seal, a mechanical seal containing lubricating oil is used to prevent water from entering the motor and has excellent durability.
    ●Equipped with an automatic burnout prevention device in the motor.

  • CX models (non-automatic)/CXA models (automatic)
    • Submersible PumpsPlastic/stainless steel models
    • for fishing
    • for industrial equipment
    • for kitchen wastewater
    • for pit gray water
    • for septic tank
    • for the chemical industry

    ● Compact and lightweight type that is convenient to carry and install.
    ● All wetted parts are made of resin and stainless steel (SUS316), which greatly improves rust resistance and durability.
    ●Eliminates clogging with a uniquely developed vortex structure.
    ●Original development of high-efficiency, energy-saving impellers and electric motors.
    ●Equipped with an automatic burnout prevention device in the motor.

  • CX-L models (for bottom water)
    • Submersible PumpsPlastic/stainless steel models
    • for bottom water

    ● Drainage is possible up to a water level of 5 to 6 mm.
    ● Compact and lightweight type that is convenient to carry and install.
    ● All wetted parts are made of resin and stainless steel (SUS316), which greatly improves rust resistance and durability.
    ●Original development of high-efficiency, energy-saving impellers and electric motors.
    ●Equipped with an automatic burnout prevention device in the motor.

  • SSX models (non-automatic)
    • Submersible PumpsCast Iron Models
    • for agricultural
    • for civil engineering

    ● The impeller uses a special synthetic rubber with improved wear resistance.
    ●The unique vortex generation mechanism guides solid matter by vortex flow and discharges it without clogging in the pump.
    ●The shaft seal is completely sealed by attaching a V-ring.
    ● Back pull-out structure for easy maintenance and inspection.
    ●Equipped with an automatic burnout prevention device in the motor.

  • SP models (Family)
    • Submersible PumpsCompact Models
    • household use

    ● Excellent performance despite being a small pump.
    ● A large amount of water can be pumped in a short time.

  • E models (large capacity, wheeled)
    • Engine PumpsLarge size Models
    • For flood and disaster countermeasures

    ●Starting method is equipped with cell / recoil.
    ● Quietness is improved by installing a V-type engine.
    ●Compact direct-acting type with a common shaft for the pump and engine.
    ●By using the self-priming auxiliary device (optional), the self-priming time is greatly reduced.
    ●The adoption of a specially designed semi-open impeller achieves a maximum particle diameter of 22mm.
    ●Wheel is big, and movement is smooth.
    ●Equipped with an outrigger mechanism to prevent overturning.

  • EP models (diesel engines)
    • Engine PumpsLarge size Models
    • For flood and disaster countermeasures

    ●Large discharge volume.
    ● Outstanding self-priming performance.
    ●Easily drains mixed soil and mud.
    ●Economic model driven by diesel engine.

  • ETS models (for civil engineering)
    • Engine PumpsMedium size Models
    • for agricultural
    • for civil engineering
    • For flood and disaster countermeasures

    ●Exhibits outstanding self-priming performance with its unique design.
    ●Two blades made of ductile cast iron are used to easily pass through solid objects.
    ●Excellent impact and abrasion resistance.
    ● A high-quality mechanical seal is used for the shaft seal.
    ●Equipped with an elastic anti-vibration device that softens vibrations and provides stable driving.
    ● Light alloy casing, engine and coaxial design for easy movement.
    ●Cleaning cover can be removed with one touch, and maintenance and inspection are easy.

  • EMH models (for medium pressures)
    • Engine PumpsCompact size Models
    • for agricultural
    • for civil engineering
    • for high pressure

    ●A semi-open impeller is adopted, and a total lifting height (maximum) of 45m to 50m is achieved with an excellent mechanism.
    ● Compact and lightweight type that is easy to move.
    ● A high-quality mechanical seal is used for the shaft seal.

PAGE TOP