絞り込み
waste water without solids
-
CS models (non-automatic)- Submersible PumpsPlastic/stainless steel models
for industrial equipment
for the chemical industry
●Wetted parts made of stainless steel, suitable for a wide range of applications as a light corrosion-resistant pump.
● Compact and lightweight design for easy transportation.
●Semi-open impeller that does not easily clog with foreign matter.
●For the shaft seal, a mechanical seal containing lubricating oil is used to prevent water from entering the motor and has excellent durability.
●Equipped with an automatic burnout prevention device in the motor. -
CS-L models (for bottom water)- Submersible PumpsPlastic/stainless steel models
for bottom water
● Drainage is possible up to a water level of 1 to 2 mm.
●Wetted parts made of stainless steel, suitable for a wide range of applications as a light corrosion-resistant pump.
● Compact and lightweight design for easy transportation.
●For the shaft seal, a mechanical seal containing lubricating oil is used to prevent water from entering the motor and has excellent durability.
●Equipped with an automatic burnout prevention device in the motor. -
CX models (non-automatic)/CXA models (automatic)- Submersible PumpsPlastic/stainless steel models
for fishing- for industrial equipment
for kitchen wastewater
for pit gray water
for septic tank- for the chemical industry
● Compact and lightweight type that is convenient to carry and install.
● All wetted parts are made of resin and stainless steel (SUS316), which greatly improves rust resistance and durability.
●Eliminates clogging with a uniquely developed vortex structure.
●Original development of high-efficiency, energy-saving impellers and electric motors.
●Equipped with an automatic burnout prevention device in the motor. -
CX-L models (for bottom water)- Submersible PumpsPlastic/stainless steel models
- for bottom water
● Drainage is possible up to a water level of 5 to 6 mm.
● Compact and lightweight type that is convenient to carry and install.
● All wetted parts are made of resin and stainless steel (SUS316), which greatly improves rust resistance and durability.
●Original development of high-efficiency, energy-saving impellers and electric motors.
●Equipped with an automatic burnout prevention device in the motor. -
SSX models (non-automatic)- Submersible PumpsCast Iron Models
for agricultural
for civil engineering
● The impeller uses a special synthetic rubber with improved wear resistance.
●The unique vortex generation mechanism guides solid matter by vortex flow and discharges it without clogging in the pump.
●The shaft seal is completely sealed by attaching a V-ring.
● Back pull-out structure for easy maintenance and inspection.
●Equipped with an automatic burnout prevention device in the motor. -
SP models (Family)- Submersible PumpsCompact Models
household use
● Excellent performance despite being a small pump.
● A large amount of water can be pumped in a short time. -
E models (large capacity, wheeled)- Engine PumpsLarge size Models
For flood and disaster countermeasures
●Starting method is equipped with cell / recoil.
● Quietness is improved by installing a V-type engine.
●Compact direct-acting type with a common shaft for the pump and engine.
●By using the self-priming auxiliary device (optional), the self-priming time is greatly reduced.
●The adoption of a specially designed semi-open impeller achieves a maximum particle diameter of 22mm.
●Wheel is big, and movement is smooth.
●Equipped with an outrigger mechanism to prevent overturning. -
EP models (diesel engines)- Engine PumpsLarge size Models
- For flood and disaster countermeasures
●Large discharge volume.
● Outstanding self-priming performance.
●Easily drains mixed soil and mud.
●Economic model driven by diesel engine. -
ETS models (for civil engineering)- Engine PumpsMedium size Models
- for agricultural
- for civil engineering
- For flood and disaster countermeasures
●Exhibits outstanding self-priming performance with its unique design.
●Two blades made of ductile cast iron are used to easily pass through solid objects.
●Excellent impact and abrasion resistance.
● A high-quality mechanical seal is used for the shaft seal.
●Equipped with an elastic anti-vibration device that softens vibrations and provides stable driving.
● Light alloy casing, engine and coaxial design for easy movement.
●Cleaning cover can be removed with one touch, and maintenance and inspection are easy. -
EMH models (for medium pressures)- Engine PumpsCompact size Models
- for agricultural
- for civil engineering
for high pressure
●A semi-open impeller is adopted, and a total lifting height (maximum) of 45m to 50m is achieved with an excellent mechanism.
● Compact and lightweight type that is easy to move.
● A high-quality mechanical seal is used for the shaft seal.
FAQs
Provides help information on how to use each product and when you have problems.
