絞り込み
waste water without solids
-
O-M (4P) mechanical seal models- On-Land Pumps (Cast Iron)Direct-Coupled/Self-Priming Models
for agricultural
for industrial equipment
for pit gray water
for well water
●The specially structured casing enables self-priming without filling the suction pipe.
●The shaft seal uses a mechanical seal that facilitates daily maintenance.
●All cast iron is the standard specification, so it can also be used for alkaline liquids.
● Use of sealed ball bearings eliminates the need to lubricate the bearings. -
O-G (4P) gland packing models
- On-Land Pumps (Cast Iron)Direct-Coupled/Self-Priming Models
- for agricultural
- for industrial equipment
- for pit gray water
- for well water
●The specially structured casing enables self-priming without filling the suction pipe.
●The shaft seal uses a gland packing method that is easy to replace.
●All cast iron is the standard specification, so it can also be used for alkaline liquids.
● Use of sealed ball bearings eliminates the need to lubricate the bearings. -
O (4P) gland packing models- On-Land Pumps (Cast Iron)Direct-Coupled/Self-Priming Models
- for agricultural
- for industrial equipment
- for pit gray water
●The specially structured casing enables self-priming without filling the suction pipe.
●The shaft seal uses a gland packing method for easy maintenance.
●All cast iron is the standard specification, so it can also be used for alkaline liquids.
● Use of sealed ball bearings eliminates the need to lubricate the bearings. (OL-8E to O-9E)
(O-10E and O-11E are open ball bearings with grease injection) -
OH (4P) gland packing models- On-Land Pumps (Cast Iron)Direct-Coupled/Self-Priming Models
- for agricultural
- for industrial equipment
- for pit gray water
- for well water
●The specially structured casing enables self-priming without filling the suction pipe.
●The shaft seal uses a gland packing method for easy maintenance.
●All cast iron is the standard specification, so it can also be used for alkaline liquids.
● Use of sealed ball bearings eliminates the need to lubricate the bearings. (OH-3E to OH-6E)
(OH-7E to OH-9E are open ball bearings with grease injection) -
OW/OHW (4P) mechanical seal models (tandem type)- On-Land Pumps (Cast Iron)Direct-Coupled/Self-Priming Models
- for industrial equipment
- for pit gray water
●Two mechanical seals are mounted on the shaft seal (tandem type).
The mechanical seal on the atmosphere side is an oil bath type, which greatly improves the shaft sealing performance.
●The specially structured casing enables self-priming without filling the suction pipe.
●All cast iron is the standard specification, so it can also be used for alkaline liquids.
● Use of sealed ball bearings eliminates the need to lubricate the bearings. -
TO (4P) gland packing models- On-Land Pumps (Cast Iron)Direct-Coupled/Self-Priming Models
- for agricultural
- for industrial equipment
- for pit gray water
● Impellers can be easily attached and detached with jack bolts.
●Maintenance can be performed without disconnecting the piping.
●All cast iron is the standard specification, so it can also be used for alkaline liquids.
●Improve the durability of the pump.
●Further pursuit of self-priming capability. -
CO (4P) gland packing SCS13 models- On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
- for agricultural
- for industrial equipment
for the chemical industry
●Wetted parts are made of SCS13 and SUS304 for excellent corrosion resistance.
●Since it is a self-priming type, it can be drained and pumped with the first priming.
● Directly connected 4P motor for quiet operation and easy maintenance and inspection. -
CO (4P) gland packing SCS14 models
- On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
- for agricultural
- for industrial equipment
- for the chemical industry
●Wetted parts are made of SCS14 and SUS316, so they have excellent corrosion resistance.
●Since it is a self-priming type, it can be drained and pumped with the first priming.
● Directly connected 4P motor for quiet operation and easy maintenance and inspection. -
COM (4P) mechanical seal SCS13 models
- On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
- for agricultural
- for industrial equipment
- for the chemical industry
●Wetted parts are made of SCS13 and SUS304 for excellent corrosion resistance.
●Since it is a self-priming type, it can be drained and pumped with the first priming.
● Directly connected 4P motor for quiet operation and easy maintenance and inspection. -
COM (4P) mechanical seal SCS14 models
- On-Land Pumps (Stainless Steel)Direct-Coupled/Self-Priming Models
- for agricultural
- for industrial equipment
- for the chemical industry
●Wetted parts are made of SCS14 and SUS316, so they have excellent corrosion resistance.
●Since it is a self-priming type, it can be drained and pumped with the first priming.
● Directly connected 4P motor for quiet operation and easy maintenance and inspection.
FAQs
Provides help information on how to use each product and when you have problems.
